Description
- Full Specifications:
- Inverter Type: Three-phase grid-tied string inverter
- Rated AC Output Power: 125 kW
- Maximum AC Output (overload): up to ~137.5 kW (110% overload capacity)
- Max. DC Input Voltage: 1100 V
- MPPT Trackers: 10 MPPT inputs
- Strings per MPPT: 2 strings per MPPT (supporting flexible array layouts)
- Max Input Current per MPPT: up to ~42 A
- Max Short-Circuit Current per MPPT: up to ~52.5 A
- MPPT Operating Voltage Range: ~180 V – 1000 V (depending on string configuration)
- Start-up (Minimum) Input Voltage: ~200 V
- Nominal AC Output Voltage: 230/400 V or 220/380 V (three-phase, 3L/N/PE or 3L/PE)
- Output Frequency: 50 / 60 Hz (region dependent)
- Max AC Output Current: ~199.4 A (at 400 V three‑phase)
- Peak Conversion Efficiency: up to ~99.0% (European / Max efficiency ~98.5–98.8%)
- Power Factor: adjustable (typically ~1, with range e.g. 0.8 leading to 0.8 lagging depending on config)
- DC Input Oversizing Allowed: yes (support for DC to AC oversize ratio per design)
- Cooling Method: Smart fan cooling (active air-cooling)
- Protection & Safety:
- Built-in DC and AC surge protection (Type II SPD)
- Anti‑islanding protection
- Insulation monitoring & fault detection
- AC/DC over-voltage, over-current, short-circuit protection
- Optional: AFCI (Arc-Fault Circuit Interruption), PID recovery, rapid shutdown (depending on configuration)
- Ingress Protection / Enclosure Rating: IP66 — dust- and water‑resistant, suitable for outdoor installation
- Operating Temperature Range: approx. –30 °C to +60 °C (no derating at 45 °C)
- Altitude Rating: up to ~4000 m (depends on site conditions)
- Dimensions (approx): 930 × 650 × 300 mm
- Weight: ~88 kg
- Communication / Monitoring: RS485 / LAN / optional Wi‑Fi / optional 4G / optional PLC — supports remote monitoring, string-level data, and system diagnostics
- Grid Compliance: Compatible with standard three-phase grid connections (3L/N/PE or 3L/PE depending on country)
